Articles Posted in the " Engineering Drawing " Category

  • DEVELOPMENT OF SURFACES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    DEVELOPMENT OF SURFACES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

      DEVELOPMENT OF SURFACES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS MCQ on development of surfaces increases clarity and understanding. Development deals with solids made out of thin sheet. A solid s cut from an edge and spread on a sheet. Development saves time taken for the manufacture of solids. It eliminates the wastage of material. […]


  • INTERSECTION OF SURFACES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    INTERSECTION OF SURFACES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    INTERSECTION OF SURFACES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS When two solid objects are to be connected, there is a requirement of maximum surface of contact between the two. It will provide a strong and leak proof joint. For getting exact & maximum contact surface, lines of intersection common to two solids are located. These […]


  • SECTION OF SOLIDS MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    SECTION OF SOLIDS MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    SECTION OF SOLIDS MULTIPLE CHOICE QUESTION (MCQ) WITH ANSWERS Many solids are internally different from outside. Section of solids helps to know the hidden internal details of a solid. Both parallel and inclined sections are taken. Section lines inclined at 450 to VP & represent the sectioned portion. The spacing between the section lines is equal. […]


  • PROJECTIONS OF SOLIDS MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    PROJECTIONS OF SOLIDS MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    PROJECTIONS OF SOLIDS MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS   MCQ on projections of solids are very useful for better understanding and clarity. One gets the idea about polyhedral, prisms, pyramids and solids of revolution. These are further helpful in the projections of sections of solids. Fig. Types of Solids, Cube, Triangular Tetrahedron and a […]


  • ISOMETRIC PROJECTIONS MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    ISOMETRIC PROJECTIONS MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    ISOMETRIC PROJECTIONS MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS MCQ on isometric projections increase knowledge and understanding as well. It is very helpful in all types of projections. It gives the 3 dimensional picture of the object. In this, dimensions are 84 % of the true dimensions. For drawing the isometric projections, isometric scale is constructed […]


  • DEVELOPMENT OF SURFACES CLASS NOTES FOR ENGINEERING

    DEVELOPMENT OF SURFACES CLASS NOTES FOR ENGINEERING

      DEVELOPMENT OF SURFACES CLASS NOTES FOR ENGINEERING Cut one surface of the solid. Open the entire solid on a sheet. It is development of surfaces. It applies to those objects made out of a thin sheet. Use true lengths in the development. Many objects need development for manufacture. It saves time, labor and wastage […]


  • PROJECTION OF POINTS CLASS NOTES FOR ENGINEERING

    PROJECTION OF POINTS CLASS NOTES FOR ENGINEERING

     PROJECTION OF POINTS CLASS NOTES FOR ENGINEERING    Projection of a point is the most basic. A point can lie in any of the four quadrants It shows the location of a light or a fan point in a building drawing. Two points when join forms a line. For a point, ‘A’ mark front view […]


  • PROJECTION OF PLANES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    PROJECTION OF PLANES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    PROJECTION OF PLANES MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS  MCQ on projections of planes increase understanding of engineering drawing. More MCQ on projection of planes will further add to knowledge.  A plane is a 2- dimensional figure like a circle, square and a rectangle. Projection of planes is done for various positions. Projections of planes […]


  • PROJECTIONS OF A STRAIGHT LINE MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    PROJECTIONS OF A STRAIGHT LINE MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

      PROJECTIONS OF A STRAIGHT LINE MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS  MCQ on projection of straight line increase the understanding of projections in engineering drawing. More MCQ on projection of line will add to knowledge. Case 1 Draw the Projections of a straight line. Given one end, true length & true inclinations. Fig. (1) […]


  • PROJECTIONS OF A POINT MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

    PROJECTIONS OF A POINT MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS

      PROJECTIONS OF A POINT MULTIPLE CHOICE QUESTIONS (MCQ) WITH ANSWERS  MCQ on projections of points increase the understanding of various projections. More MCQ on projections of a point add to the knowledge further. Use First angle projection. Seen form top ,drawn at the bottom Fig. Four Quadrants 1, 2,3 & 4 Fig. Projections of […]